|
Find the nearest dealer
| |
Boat House Lifts
The easiest and most economical way to store your boat . . .
Boat House Lift Capacities!
|
 |
3,000 lb
4,000 lb
6,000 lb
8,000 lb
|
Available in four standard boat house models with capabilities from 3,000 to
8,000lbs. Doozie Boats Lifts have been engineered and tested to be safe
and dependable!
 |
 |
Key Benefits
|
Designed to lift boat from above, under a roof Can be mounted to properly
spaced pilings
- Lifts come Complete (except wood)
- pipe with hangers and pulleys
- spring loaded up/down switch for safety
- 2 piece motor/drive cover
- Installation - typically 2 - 4 hours
- Side mounted drive for easy maintenance
- Lift range 10' - Lift speed approximately 3.5 ft/min
3000BH
- 8' Cradles Beams / 9' Optional
- 3/16" Stainless Steel Cable
- 3/4 HP Sealed Motor and Doozie Gear Drive
- Wood Needed 2-2x8x12- Carpet Included
3000PT
- 9' PT Cradle lifts Boat under deck, not Pontoons
- 3/16" Stainless Steel Cable
- 3/4 HP Sealed Motor and Doozie Gear Drive
- Wood Needed 4-2x6x16- No Carpet Needed
4000BH Deluxe
- 9' x 4" Cradle Beams
- 1/4" Stainless Steel Cable
- 1 HP Sealed Motor and Doozie Gear Drive
- Wood Needed 2-2x8x12- Carpet Included
DOOZIE 4000BHO - 6000BHO Single Motor
Capacity Boat House Lift
- Hot Dip Galvanized
- Designed to lift boat from above, under a roof
- Lift hangs on overhead steel beams
- Center mounted drive pipe
- Lift comes Complete (except wood)
- pipe and hangers
- grease gutters
- 1/4" stainless steel cable
- spring loaded up/down switch for safety
- carpet for runners
- 2 piece motor/drive cover
- Wood Needed 2-2x8x12
- Installation - typically 1-3 hours
- Lift range 10'
- Lift speed approximately 3.5 feet/minute
4000BHO
- 12' x 3" Overhead Steel Beams/Pulleys
- 1 HP Sealed Motor and Doozie Gear Drive
- 9' x 4" Cradle Beams
6000BHOSM
- 12' x 4" Overhead Steel Beams/Pulleys
- 6000# Motor and Doozie Gear Drive - 220 Volts
- 9' x 5" Cradle Beam with Adjustable BracketsKey Benefits
8000BHO
- Hot Dip Galvanized
- Designed to lift boat from above (under a roof)
- Lift hangs on overhead steel beams
- Lift comes Complete (except wood)
- pipes and hangers
- 12' x 5" overhead beams
- 5/16" SS cable
- DOOZIE double drive
- 2 piece motor/drive covers
- spring loaded up/down switches for safety
- 9' x 6" I beam cradles with adjustable runners
- carpet for runners
- Wood needed 4 - 2x12x12
- Installation - typically 2 - 4 hours
- Lift range-10'
- Lift speed approximately 3.5 feet/minute
|
